[ Up ] [ Engine Related Notes ] [ Vendors ] [ Tires ] [ Brakes ] [ Antiroll Bars ] [ Emission Testing ] [ Wheel Offset ] [ 1/4 Mile ET ] [ Top Speed ] [ Dyno Correction ] [ Tire Diameter ] [ Winter Storage of an RX ] [ Cockpit Instrumentation ] [ 99 RX-7 Updates ] [ Nitrous Primer ] [ War Stories ] [ RX-7 E-Mail List ]

Dyno Correction Calculator

Enter Dyno Run Conditions

Temperature: ºFahrenheit

Barometric Pressure: inHg  (inches of Mercury)

Relative Humidity: %

Uncorrected Dyno Horsepower:

Vapor Pressure = inHg

SAE  Air Correction Factor =   J1349 AUG2004

     SAE Corrected Wheel Horsepower =

     Estimated SAE Corrected Flywheel Horsepower =

Motorsports Standard Atmosphere Correction Factor =

     MSA Corrected Wheel Horsepower =

     Estimated MSA Corrected Flywheel Horsepower =

STD Air Correction Factor =

     STD Corrected Wheel Horsepower =

     Estimated STD Corrected Flywheel Horsepower =

This calculator converts your dyno run into corrected SAE, MSA and STD horsepower. These correction factors are used by dyno shops to correct for nonstandard temperature, barometric pressure and humidity. The Flywheel HP estimate assumes an 11% driveline loss.
SAE J1349 standard day is 77ºF, 29.23inHg (inches of Mercury) pressure, 0% Relative Humidity.
Motorsports Standard Atmosphere (MSA) is 60ºF, 29.92 and 0% humidity.
STD standard day is 68ºF, 29.92 and 0% humidity.
See my Free Android Drag Racing Calculator App in the Google Play Store
[S2000 Race Car] [Corner Balance Calculator] [Alignment Calculator] [Tire Diameter Calculator]
[Convert Toe Degrees To Inches] [Convert Toe Inches To Degrees]

Recommended Reading

 

 [ Home ] [ Up ] [ Engine Related Notes ] [ Vendors ] [ Tires ] [ Brakes ] [ Antiroll Bars ] [ Emission Testing ] [ Wheel Offset ] [ 1/4 Mile ET ] [ Top Speed ] [ Dyno Correction ] [ Tire Diameter ] [ Winter Storage of an RX ] [ Cockpit Instrumentation ] [ 99 RX-7 Updates ] [ Nitrous Primer ] [ War Stories ] [ RX-7 E-Mail List ]